Torp

Description

What makes the TM25 motor unique?

-Various mounting points make it possible to be used with other electric vehicles

-Works with Hall sensors and encoder, which makes it compatible with different controllers

-Has 3 times less resistance compared to the stock SurRon motor.

-Compatible both with the TC500* and TC1000 controller

*IMPORTANT: TM25 motor is NOT COMPATIBLE with Torp TC500 controller HW 1.0, 1.1. and 1.2. HW version of your controller is written on the silver sticker at the side of the controller. In case you own one of these versions and wish to buy the TM25 motor, please contact us directly.

Technical specifications:

• Motor type: IPM
• Voltage: 48V – 120V
• Continuous Power: 13 kW
• Peak Power:
  on 72V – 27 kW
  on 80V – 31 kW
  on 120V – 40 kW
• Rated Speed: 6000 RPM
• Max RPM: 10 000 RPM
• Position sensor: Hall sensor or Encoder
• Encoder points: 1024 (4096)
• Max magnet temp: 150 C
• Phase current: up to 700 A
• Kt constant [Nm/A]: 0.105
• Torque 500 A: 52.5 Nm
• Torque 700 A: 67 Nm
• KV rating: 85
• Motor Resistance: 3,4 mO
• Temp. sensor: PT1000
• Efficiency: up to 95%
• Protection class: IP67
• Weight: 10 kg
• Motor Size: 115*165 mm
• Installation: Mid
• Number of pole pairs: 5
• Cooling method: Air

Description

-Switch between modes
-Displays controller data and speed
-Displays battery data
-Use it to initiate reverse on SurRon Light Bee and Talaria MX3 / MX4
-Activate Daily mode button on SurRon Light Bee and Talaria MX3 / MX4

-Installation by connecting directly to the Torp Controller`s wiring loom
-High brightness display

Compatible with:

TC500 controler Surron Light Bee / Talaria MX3 / MX4

TC1000 controler Surron Light Bee / Talaria MX3 / MX4

TC100 controler Surron Ultra bee

Dimensions: 85 x 65 x 60 mm
Viewing angle: 170°
Display type: 2 ” IPS
Data port: Bluetooth / CAN
Handlebar: Ø 22.2/25.4/31.8

Operating temperature: -20°C ~ 60°C
Waterproof certification: IP65

Included in the package:
-1x Torp Display
-1x Hex key

TC1000 controller has been developed to boost the performance of the SurRon Ultra Bee e-bikes. Get up to 17kW with Stock battery or 30kW with the aftermarket 72V battery.

Easy to install and configure with just a couple of clicks of the app.

INCLUDED IN THE PACKAGE:

-1x TC1000 Controller
-1x wire harness with special electronics
-1x aluminum heatsink (comes in 3 different colors: black, red or blue)
-screws and tools needed for installation
-4x stickers
-short instructions

SPECIFICATIONS:

-Field-oriented control (FOC)
-Supported batteries: up to 80V nominal 22S (92,4 V fully charged)
-Max Power: 50kW*
-Sensored (HALL Encoder) and sensorless control
-Max Battery Current: 700 A
-Max phase current: 1000 A*

*The maximum power you can achieve depends on the motor and battery you are using. The max PA depends on your motor.

-Efficiency up to 99%
-Working temperature: from -15 to 75 C°
-Bluetooth communication
-Pre-calibrated: Easy calibration through mobile app
-Overcurrent, overvoltage, undervoltage and overtemperature protection
-Communication with stock BMS
-Different regenerative braking and throttle modes
-Weight: 1,3kg
-Features: Mobile App (IOS & Android), stock SurRon display
-Protection class: IP67
-Regular firmware updates

Torp hand bediening motor rem achteruit rijden.

Passend op Torp Controlers:

TC500 Controler Surron Light Bee

TC500 Controler Talaria MX3/MX4

TC1000 Controler Surron Light Bee

TC1000 Controler Surron Ultra Bee